User's Manual

Figure 20, AP433i & 433is wall mounting bracket
• Place the mounting bracket against the wall with the sliding lock
mechanism facing upwards. The Quick Reference Installation instructions
on the bracket should be visible.
• Using the holes on the mounting bracket itself as a guide, mark the
location on the wall for the AP bracket mounting screws. If possible,
center the mounting screws on a wall stud. (If mounting on a wall stud is
impossible, use plastic wall anchors on the remaining screws.)
• Drill holes at the locations you marked:
o 3/16-inch holes if you are using plastic anchors
o 1/8-inch holes if you are using only the screws
• If you are using plastic anchors, install them in the holes.
• Line the bracket up with the holes and screw in the screws.
• Attach the mounting screws to the underside of the AP433i in the holes
provided (indicated in Figure 21, AP433i & 433is mounting screw holes)
Figure 21, AP433i & 433is mounting screw holes
• Orient the AP433i horizontally so that you can read the Meru logo and
the Console and network ports are pointed downwards - this orientation
provides optimum MIMO performance.
• Align the mounting screws on the back of the AP433i with the
corresponding holes on the mounting