Installation Guide

2 Meru Access Point Installation Guide © 2012 Meru Networks, Inc.
AP300
AP300
The AP300 Access Point series delivers high performance, full-speed, Wi-Fi certified
802.11n based on draft 2.0 connectivity while simultaneously supporting legacy
802.11a/b/g devices. AP300 is available in the configurations shown below.
AP300 Configurations
AP300
Features for the AP300 include:
 802.11n support with channel bonding in both 2.4GHz and 5GHz frequency bands.
Channel bonding combines two 20Mhz channels into a single-wide 40Mhz channel
for increased throughput.
 Dual-band external antenna options optimized for MIMO mode
 Plug and Play deployment using centralized controller platforms
 Multi-layered security including standard WPA2, 802.11i security such as
automatic traffic inspection
 Each of these Access points may be powered by a standard 802.3af PoE device.
Model Configuration
AP332i
Two dual-band 802.11n radios with 3x3 MIMO and internal
antennas
AP332e
Two dual-band 802.11n radios with 3x3 MIMO and external
antennas
AP320i
Two dual-band 802.11n radios with 3x3 MIMO and internal
antennas
AP320e
Two dual-band 802.11n radios with 3x3 MIMO and external
antennas
AP310
Single dual-band 802.11n radio with 3x3 MIMO and external
antennas
AP311
Single dual-band 802.11n radio and single 802.11a/b/g
radio (AP320 upgradable) with external antennas
AP302
Two dual-band 802.11a/b/g radios (AP320 upgrade able)
with external antennas
AP301
Single dual-band 802.11a/b/g radio (AP310 upgrade able)
with external antennas