User's Manual
Table Of Contents
- About This Guide
- Access Points
- Installing AP300
- Safety Precautions
- Best Practices for an AP300/AP200 Network
- Unpack the AP300
- Determine Power Requirements
- Installation Requirements
- Install the AP300
- Select a Location
- Attach the Provided Antennas
- Install the Remote Antenna Mount (optional)
- Install External ACC-ANT-MIMO-MNT Antenna with Three Connectors (optional)
- Install Remote ACC-ANT-6ABGN-24 Antenna with Six Connectors (optional)
- Install Antennas With One Connector (optional)
- Install the Access Point
- Check AP300 LED Activity
- Where to Go From Here
- Installing AP320i
- Installing AP200
- Installing AP150
- Installing OAP180
- Cautions and Warnings
- Regulatory Information
42 Meru Access Point Installation Guide © 2010 Meru Networks, Inc.
Installing AP320i
brackets such as the Proxim AP4000 bracket and standard Cisco brackets. You cannot, however, mount
AP320i directly on an AP150 wall-mount bracket; in this case, you must remove and replace the AP150
bracket. Installation directions are provided below.
Mount AP320i in any of the following ways:
Mount AP320i On a Suspended Ceiling
Mount AP320i Above a Suspended Ceiling (Plenum)
Mount AP320i Vertically on a Wall
Set AP320i on a Shelf
Mount AP320i Below a Recessed Ceiling