User's Manual

Check AP300 LED Activity
© 2007 Meru Networks, Inc. Installing the AP300 11
Figure 7: Connect AP300 to LAN
7.
Either connect an external power supply to the power connector and plug it into the wall,
or connect an appropriate PoE power device to the Ethernet port (see Figure 7).
Check AP300 LED Activity
After the AP300 is connected, the LEDs should light (see Figure 8).
Figure 8: AP300 Status LEDs
The functions of the five LEDs are described in Table 5.
When the AP300 is first connected to the controller and any time the access point is rebooted
thereafter, the AP initializes with and then is programmed by the controller. When the AP is
first powered up, all LEDs are green. Thereafter, the Status LED (see
Figure 8) color reflects
the various operating states (
Table 5).
A
5
A
6
5V DC
CON LAN
00209
Ethernet Port
A
5
A
4
A
3
A
3
P
W
R
S
T
A
T
L
A
N
R
F
1
R
F
2
00208
power status LAN RF1 RF2