User's Manual

Installation Requirements
Installing the AP200 7
An array of holes on the mounting bracket (see Figure 4) allow it to be mounted on the wall and over
junction boxes or molly bolts. There are also holes for passing the PoE Ethernet or external power
supply cable through the bracket if the bracket is mounted on a junction box or over the ceiling T-bar
box hanger.
Confirm that the AP200 shipping package contains the following items:
z Access point
z Mounting bracket with two mounting screws
z CD-ROM of Meru Wireless LAN System documentation
z Optional suspended ceiling mounting hardware kit
z Optional T-bar box hanger hardware kit for mounting above a suspended ceiling
Figure 4: AP200 Mounting Bracket
Installation Requirements
The following recommended mounting locations provide the best reception for the AP200:
z On a horizontal surface, such as a table or a desk
z On a vertical surface, usually a wall
z Below a hanging ceiling
Access point mount
Ceiling mount hole
Ceiling mount hole
A
ccess point mount
Access point mount
Locking detent
W
all cable access
S
uspended ceiling
c
able access
00100