User's Manual
Table Of Contents
- About This Guide
- Meru Access Points and Radio Switch
- Installing the RS4000
- Installing the AP200
- Installing the AP150
- Specifications
- Regulatory Information
- Channels
- Mounting Bracket Stencils
44 Meru Access Point and Radio Switch Installation Guide © 2007 Meru Networks, Inc.
Checking LED Activity
AP200 Status LEDs
Four status LEDs on the face of the AP200 also light, as shown in Figure 31.
. .
Figure 31: AP200 Status LEDs
The functions of the status LEDs are described in Tab le 7.
When the AP200 is first connected to the controller and any time the access point is
rebooted thereafter, the AP initializes with and then is programmed by the
controller. When the AP is first powered up, all LEDs are green. Thereafter, the
Status LED (see Figure 31) color reflects the various operating states (Tab le 7).
AP200
RF2
RF1
STATUS
POWER
00113