User's Manual
Table Of Contents
- About This Guide
- Meru Access Points and Radio Switch
- Installing the RS4000
- Installing the AP200
- Installing the AP150
- Specifications
- Regulatory Information
- Channels
- Mounting Bracket Stencils
14 Meru Access Point and Radio Switch Installation Guide © 2007 Meru Networks, Inc.
Installing the RS4000
Installing the RS4000
Mounting the RS4000
You can mount the RS400 in the following ways:
z Wall Mounting the RS4000
z Mounting Below a Suspended Ceiling
z Mounting Above a Suspended Ceiling
z Placing and Positioning the Antenna
z Hoffman/NEMA Enclosure RS4000 Installation
Wall Mounting the RS4000
The RS4000 can be mounted to any type of solid wall (including ceiling walls) using
the supplied wall mount bracket. The bracket also allows for junction box mounting.
Note:
The RS4000 has a security cable slot so you can secure the RS4000 with a
standard security cable (for example, Kensington cable locks), such as are used to
secure laptop computers.
To wall mount an RS4000:
1. Remove the bracket from back side the RS4000, if it is attached, by unscrewing
each of the 4 knurled thumbscrews (see Figure 6).