Installation Guide

Table Of Contents

Installation Requirements

You need the tools listed in Tab le 2 .

Table 2: RS4000 Installation Tools

About an Hoffman/NEMA Enclosure Installation

The recommended RS4000 installation is a wall mount, but if necessary the RS4000

can be housed inside a protective NEMA or Hoffman box that is manufactured with

external corner tabs for standard wall mounting, above or below a ceiling. When

installing in the Hoffman/NEMA box, the RS4000 attaches to an optional

Hoffman/NEMA box mounting plate, which replaces the standard wall mount bracket.

Meru leaves the placement and orientation of the Hoffman/NEMA enclosure to the

customer. It will be necessary to drill holes through the plastic NEMA enclosure with

a Meru-provided template to enable the antenna and Ethernet cabling to exit the

enclosure. Instructions for performing this task are provided in the section “Creating

Installation Type Tools Required

Vertical mounting over a wall

stud

z Drill

z 1/8"drill bit

z Screwdriver

z (Optional) Pliers

Vertical mounting on sheetrock

z Drill

z 3/16" drill bit

z Screwdriver

z (Optional) Pliers

Horizontal mounting below a

hanging ceiling

z Two caddy fasteners

z Two plastic spacers

z Two keps nuts (with attached lock washer)

z Mounting bracket

Mounting above a ceiling tile

z Two T-ra i l cl i p s

z One T-box hanger

z One bracket mounting clip

z Mounting bracket

Caution!

This method of mounting has not been evaluated by Underwriters

Laboratories.