User's Manual

6 Installing the Meru Air Point 100
Revision 0.1, September 2003 (9/22/03)
LED Activity
LED Activity
After the Air Point 100 access point is connected, the LEDs near the RJ-45 connector
should light.
Figure 3: RJ-45 LEDs
The green LED on the left indicates that Ethernet activity is taking place. The LED on
the right indicates that an Ethernet link is present. If this LED is yellow, the link is a
100BaseT link. If this LED is green, the link is a 10BaseT link.
The some of four LEDs on the face of the access point will also light. The LED closest
to the Meru logo and furthest from the Ethernet port lights green to indicate the pres-
ence of power. The other LEDs are explained in the System Administrator’s Guide.
Link present: yellow = 100MB; green = 10MB
Ethernet activity