Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
62 CLI Command Reference
Revision 0.1, July 2003
wirelessif or wif: Wireless Interface Commands
{mediumpower |
medium}
The medium transmission power of the wireless interface, from 12
dBm to 22 dBm.
{highpower | high} The high transmission power of the wireless interface, from 12 dBm to
22 dBm.
antennaset The antenna set, either 'internal' or 'external', to use.
antennanum The antenna to use, either '1', '2', or 'both'.
{baserate1 | rate1} First base transmit rate.
{baserate2 | rate2} Second base transmit rate.
{baserate3 | rate3} Third base transmit rate.
{baserate4 | rate4} Fourth base transmit rate.
txrate1 First supported transmit rate.
txrate2 Second supported transmit rate.
txrate3 Third supported transmit rate.
txrate4 Fourth supported transmit rate.
Argument Description