Installation Instructions

PRELIMINARY
CLI Command Reference 61
Revision 0.1, July 2003
wirelessif or wif: Wireless Interface Commands
wirelessif ids
Displays the node numbers for all known subcontrollers.
Syntax wirelessif ids
Description Displays a list of node numbers for wireless interfaces known by this controller.
Numbers are displayed one on each output line.
wirelessif set
Sets one or more of the configuration values for the specified interface.
Syntax wirelessif set <node_id>
desc=<val>
channel=<val>
{lowpower=<val> | low=<val>}
{mediumpower=<val> | medium=<val>}
{highpower=<val> | high=<val>}
antennaset=<val>
antennanum=<val>
{baserate1=<val> | rate1=<val>}
{baserate2=<val> | rate2=<val>}
{baserate3=<val> | rate3=<val>}
{baserate4=<val> | rate4=<val>}
txrate1=<val>
txrate2=<val>
txrate3=<val>
txrate4=<val>
Description For details, see wirelessif get.
Argument Description
desc A text description for this entry.
channel The channel number the wireless interface is to use.
{lowpower | low} The low transmission power of the wireless interface, from 12 dBm to
22 dBm.