Installation Instructions

PRELIMINARY
60 CLI Command Reference
Revision 0.1, July 2003
wirelessif or wif: Wireless Interface Commands
Field Description
Node ID The unique numeric ID of the node.
Description A text description for this entry.
Operational Status The operational status of the interface: 'UP' or 'DOWN'.
Last Change Time Time of last operational state change of the interface.
Type The type of the wireless interface.
BSSID The Basic Service Set ID of the wireless interface.
ESSID The Extended Service Set ID of the wireless interface.
Channel The channel number the wireless interface is to use.
Low Transmit Power
(dBm):
The low transmission power of the wireless interface, from 12 dBm
to 22 dBm.
Medium Transmit
Power (dBm):
The medium transmission power of the wireless interface, from 12
dBm to 22 dBm.
High Transmit Power
(dBm):
The high transmission power of the wireless interface, from 12 dBm
to 22 dBm.
Antenna Set: The antenna set, either 'internal' or 'external', to use.
Antenna Number: The antenna to use, either '1', '2', or 'both'.
Base Transmit Rate 1
(Mbits/sec):
First base transmit rate, in megabits per second.
Base Transmit Rate 2
(Mbits/sec):
Second base transmit rate, in megabits per second.
Base Transmit Rate 3
(Mbits/sec):
Third base transmit rate, in megabits per second.
Base Transmit Rate 4
(Mbits/sec):
Fourth base transmit rate, in megabits per second.
Supported Transmit
Rate 1 (Mbits/sec):
First supported transmit rate, in megabits per second.
Supported Transmit
Rate 2 (Mbits/sec):
Second supported transmit rate, in megabits per second.
Supported Transmit
Rate 3 (Mbits/sec):
Third supported transmit rate, in megabits per second.
Supported Transmit
Rate 4(Mbits/sec):
Fourth supported transmit rate, in megabits per second.