Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 55
Revision 0.1, July 2003
topo: Network Topology Commands
{topostaats | staats}
Display station/ats edge records.
Syntax {topostaats | staats}
An entry will be displayed for every station that is within range of an ATS. In addi-
tion to the station MAC address and ATS ID, a flag is displayed indicating which ATS
the station has been assigned to. The Received Signal Strength Indicator (RSSI) for the
station at the ATS is also displayed. RSSI values (a relative, and therefore unitless,
measure) typically range from 17 to 42.
topostaats all
Displays information about relationship between stations and access points.
Syntax topostaats all
topostation all
Displays information about relationship among stations that are known by the
controller.
Syntax {topostation | toposta} all
Field Description
MAC Station's MAC address.
RsrcRqst Fraction of bandwidth, in microseconds per second.
AssgnATS The ATS to which the station is assigned.
Handoff Time Date and time of last handoff.
DataRate Data rate in megabits per second.
#ATSAtch The ATS to which the station is attached.
PwerSvMde Power save mode; 'on' or 'off'.