Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
54 CLI Command Reference
Revision 0.1, July 2003
topo: Network Topology Commands
topoats all
Displays information about all access points and summary information about their
neighboring access points.
Syntax topoats all
{topoatsats | atsats}
Syntax {topoatsats | atsats}
Display the Received Signal Strength Indicator (RSSI) between all pairs of ATSs that
are within range of each other. Each entry displays the RSSI of the source (HeadID)
at the receiving end (TailID). The RSSI is a unitless value with typical values between
17 and 42.
topoatsats all
Displays information about relationship among access points.
Syntax topoatsats all
NghbrCnt Number of visible ATS neighbors.
AttchCnt Number of stations probed and associated.
AssgdCnt Number of stations that have been associated.
RsrcAllcFrqcy Resource allocation frequency, in times per second. Typically between 10
and 50.
Field Description