Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 53
Revision 0.1, July 2003
topo: Network Topology Commands
topo: Network Topology Commands
{topoascats | ascats}
Displays all subcontroller-access point relationships.
Syntax {topoascats | ascats}
Description Display ASC-ATS relationships. Each row displays the ASC and ATS node IDs and
the relationship between each pair. The relationship can be 'None', 'Bound', or
'Visible'.
topoascats all
Displays information about relationship between subcontrollers and access points.
Syntax topoascats all
topoats
Display access points seen by the controller. Each row displays the following:
Syntax topoats
Field Description
NodeID The ATS node ID.
RsrcRqst Fraction of bandwidth, in microseconds per second, for that ATS.
RsrcAllcd Fraction of bandwidth, in microseconds per second, for the group.