Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 51
Revision 0.1, July 2003
Station Commands
Description Displays the following fields for each of the stations requested:
station set
Sets one or more of the configuration values for the station that has the specified
MAC address.
Syntax station set <macaddress>
desc=<val>
{ipaddress=<val> | ip=<val>}
{stationstats | stastats}
Displays station statistics.
Syntax {stationstats | stastats}
Field Description
MAC Address The MAC address of the station.
Description The descriptive name of the ethernet interface.
Assignment Type The mechanism by which the IP address was assigned, either
STATIC or DYNAMIC.
IP Address The IP address assigned to the station.
ATS Node The ATS node associated with the station.
ASC Node The ASC node associated with the station.
Availability Status The availability of the node: 'OFFLINE' or'ONLINE'.
Argument Description
desc The descriptive name of the ethernet interface.
ipaddress (or ip) The IP address assigned to the station.