Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 45
Revision 0.1, July 2003
security: RADIUS Security Commands
security: RADIUS Security Commands
{security | sec}
Syntax {security | sec}
These commands allow a user to set and query RADIUS and related security and
authentication information.
security get
Displays configuration information for how a controller interfaces with a RADIUS
server.
Syntax security get
Displays the following fields:
Field Description
Node ID The unique numeric ID of the node.
Privacy Bit The privacy state that the ATSs should use; either ON, OFF, or AUTO.
Security Mode The security mode that the ATSs should use; either OPEN or 802.1x.
RADIUS Server IP
Address
IP address of the RADIUS server in nnn.nnn.nnn.nnn format.
RADIUS Server
Port
Port number to use to connect to the RADIUS server.
RADIUS Secret The RADIUS secret.
Rekey Period (sec-
onds)
The rekey period, in seconds.