Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 43
Revision 0.1, July 2003
Reboot (or restart) Commands
Reboot (or restart) Commands
{reboot | restart}
Reboot one or all the nodes in the network.
Syntax {reboot | restart}
reboot all
Reboot all the nodes in the WLAN infrastructure.
Syntax reboot all
reboot asc
Syntax reboot asc <node_id>
Reboot the ASC node indicated by the argument <node_id>.
reboot ats
Reboot the ATS node indicated by the argument <node_id>.
Syntax reboot ats <node id>