Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 41
Revision 0.1, July 2003
qosrule or ruleQoS: Rule Commands
[onoff=<val>]
[admission=<val>
[{droppolicy=<val> | drop=<val>}]
[ttl=<val>]
[udpttl=<val>]
[tcpttl=<val>]
[stealtime=<val>
[{udpstealtime=<val> | udpsteal=<val>}]
[{tcpstealtime=<val> | tcpsteal=<val>}]
[{percentbwscaling=<val> | bwscaling=<val>}]
Description For details, see qosvars get.
Argument Description
onoff QoS state ON or OFF
admission Admission Control. Valid values are
admitall
pending
reject
droppolicy ( or drop) Drop Policy. Valid values are tail or head
ttl Default time to live in seconds
udpttl Default UDP time to live
tcpttl Default TCP time to live
stealtime Default steal time
{udpstealtime | udp-
steal}
UDP steal time
{tcpstealtime | tcp-
steal}
TCP steal time
{percentbwscaling |
bwscaling}
Scale factor for Tspec bandwith