Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
40 CLI Command Reference
Revision 0.1, July 2003
qosrule or ruleQoS: Rule Commands
qosvars
These commands manages Quality of Service (QoS) by setting global parameters.
qosvars get
Displays information about QoS variables.
Syntax qosvars get
Description Displays the following fields:
qosvars set
Sets one or more of the configuration values for the specified interface.
Syntax qosvars set
Field Description
QoS State
QoS state: 'on' or 'off'.
Admission Control Admission Control: admitall, pending, reject
Drop Policy Drop Policy - tail, head
Time to live Default time to live, in seconds.
UDP time to live Default UDP time to live, in seconds.
TCP time to live Default TCP time to live, in seconds.
Steal time Default steal time, in seconds.
UDP steal time UDP steal time, in seconds.
TCP steal time TCP steal time, in seconds.
Bandwith Scaling Scale factor for Tspec bandwith in percent. May range from 1% to as
high as 100,000%, although 100% is typical.