Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 39
Revision 0.1, July 2003
qosrule or ruleQoS: Rule Commands
qosstats
Displays QoS global statistics.
Syntax qosstats {get | g}
Description Displays the following QoS global statistics:
H.323, SIP, and total session counts.
H.323, SIP, and total rejected counts.
H.323, SIP, and total pending counts.
QoS active flow count.
Qos pending flow count.
{srcport | sp} The source IP port.
{srcmask | sm} The source address netmask.
{netprotocol |
nprot}
Network protocol: 'udp' or 'tcp'.
{qosprotocol |
qprot}
QoS protocol: 'sip', 'http', or 'h.323'.
vlanid | vl Defaults to "0". The virtual LAN ID: from 0 to 4095.
avgpktrate | avg Defaults to "0". Average packet rate: from 0 to 200.
action | act Defaults to "capture". Action: - 'forward', 'capture' (default) or 'drop'.
droppolicy | dr Defaults to "tail". Drop Policy - tail, head.
tokenbucketrate
| tbr
Defaults to "0". TSpec Token Bucket rate
priority Defaults to "0". The number (0-8) that specifies best effort priority queue
where 0 is default (no priority) and 8 is highest priority
traficcontrol | tc Defaults to "0". The only current value is [P]olicing that will turn on the flag
By default is not set
Argument Description