Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
38 CLI Command Reference
Revision 0.1, July 2003
qosrule or ruleQoS: Rule Commands
qosrule ids
Displays the rule numbers for all qos mapping rules deļ¬ned for this controller.
Syntax {qosrule | rule} ids
Description Displays a list of rule numbers that are associated with this controller. Numbers are
displayed one on each output line.
qosrule new
Creates a new QoS rule.
Syntax {qosrule | rule} new <rule_id>
{dstip=<val> | di=<val>}
{dstport=<val> | dp=<val>}
{dstmask=<val> | dm=<val>}
{srcip=<val> | si=<val>}
{srcport=<val> | sp=<val>}
{srcmask=<val> | sm=<val>}
{netprotocol=<val> | nprot=<val>}
{qosprotocol=<val> | qprot=<val>}
[vlanid=<val> | vl=<val>]
[avgpktrate=<val> | avg=<val>]
[action=<val> | act=<val>]
[droppolicy=<val> | dr=<val>]
[tokenbucketrate=<val> | tbr=<val>]
[priority=<val>]
[traficcontrol=<val> | tc=<val>]
Description
See qosrule get for details.
Argument Description
{dstip | di} The destination IP address.
{dstport | dp} The destination IP port.
{dstmask | dm} The destination address netmask.
{srcip | si} The source IP address.