Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
36 CLI Command Reference
Revision 0.1, July 2003
qosrule or ruleQoS: Rule Commands
qosrule or ruleQoS: Rule Commands
These commands manage Quality of Service (QoS) rules. Each rule is uniquely iden-
tified by its rule ID.
qosrule all
Displays configuration information for all QoS rules defined on the controller. See
qosrule get for details.
Syntax {qosrule | rule} all
qosrule del
Deletes the rows specified by the row IDs.
Syntax {qosrule | rule} del <rule_id> [...]
qosrule get
Displays information about QoS rules.
Syntax {qosrule | rule} get <rule_id> [...]