Installation Instructions

PRELIMINARY
34 CLI Command Reference
Revision 0.1, July 2003
qoS or codec: Quality of Service Commands
Syntax {qoscodec | codec} ids
Description Displays a list of rule numbers that are defined for this controller. Numbers are
displayed one on each output line.
qoscodec new
Creates a new codec-to-flow-spec mapping .
{qoscodec | codec} new <rule_id>
codec=<val>
{qosprotocol=<val> | qp=<val>}
{tokenbucketrate=<val> | tbr=<val>}
{maxdatgramsize=<val> | max_pkt=<val>}
{minpolicedunit=<val> | min_unit=<val>}
{samplerate=<val> | sample=<val>}
[tokenbucketsize=<val> | tbs=<val>]
[peakrate=<val> | peak=<val>]
[rspecrate=<val> | rrate=<val>]
[rspecslack=<val> | rslack=<val>]
Description
Argument Description
codec The codec type. Possible values are: default, g711u, 1016, g721, gsm,
g723.1, dv14, dv14-2, lpc, g711a, g722, g722.1, mpa, g728, g729,
97red, siren, h261, or h263.
{qosprotocol | qp} QoS protocol - sip, http or h323.
{tokenbucketrate |
tbr}
The traffic spec token bucket rate. From 0 to 1,000,000 bytes/second.
{maxdatgramsize |
max_pkt}
Max datagram size. From 0 to 1,500 bytes.
{minpolicedunit |
min_unit}
Minimum policed units. From 0 to 1,500 bytes.
{samplerate | sam-
ple}
Sample rate. From 0 to 200 bytes/second.
tokenbucketsize |
tbs
Defaults to "8". Token bucket size in bytes. From 0 to 16,000 bytes.
peakrate | peak Defaults to "0". Traffic spec peak rate. From 0 to 1,000,000 bytes/sec-
ond.