Installation Instructions

Table Of Contents
PRELIMINARY
CLI Command Reference 33
Revision 0.1, July 2003
qoS or codec: Quality of Service Commands
Description Displays the following fields for each of the rules requested:
qoscodec ids
Displays the mapping rule numbers for all defined rules.
Argument Description
rule_id One or more numbers identifying codec flow-spec mapping rules that are
associated with this controller. Information is displayed for all the listed items.
NOTE:
To list information for all codecs, use qoscodec all.
Field Description
Rule ID The unique numeric ID of the QoS codec flow spec mapping rule.
Codec The codec type. Possible values are: default, g711u, 1016, g721,
gsm, g723.1, dv14, dv14-2, lpc, g711a, g722, g722.1, mpa, g728,
g729, 97red, siren, h261, or h263.
QoS Protocol QoS protocol - sip, http or h323.
Traffic Spec Token
Bucket Rate (bytes/sec)
The traffic spec token bucket rate. From 0 to 1,000,000 bytes/sec-
ond.
Token Bucket Size
(bytes)
Token bucket size in bytes. From 0 to 16,000 bytes.
Traffic Spec Peak Rate
(bytes/sec)
Traffic spec peak rate. From 0 to 1,000,000 bytes/second.
Max Datagram Size
(bytes)
Max datagram size. From 0 to 1,500 bytes.
Min Policed Unit (bytes) Minimum policed units. From 0 to 1,500 bytes.
Reservation Spec Rate
(bytes/sec)
Reservation spec rate. From 0 to 1,000,000 bytes/second.
Reservation Spec Slack
(microsec)
Reservation spec slack. From 0 to 1,000,000 microseconds.
Sample Rate
(bytes/sec)
Sample rate. From 0 to 200 bytes/second.