Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
32 CLI Command Reference
Revision 0.1, July 2003
qoS or codec: Quality of Service Commands
qoS or codec: Quality of Service
Commands
These commands manage codec-to-flow-spec mapping rules. Each rule is uniquely
identified by its rule ID. The definition and meaning of most of these fields are clari-
fied in IETF RFC 2210.
qoscodec all
Displays configuration information for all codecs. See qoscodec get for details.
Syntax {qoscodec | codec} all
Returns all the fields for all the rows in the table.
qoscodec del
Deletes the rows specified by the row IDs.
Syntax {qoscodec | codec} del <rule_id> [...]
qoscodec get
Displays configuration information for one or more codec rules.
Syntax {qoscodec | codec} get <rule_id> [...]