Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 31
Revision 0.1, July 2003
if: Interface Commands
Syntax interface ids
Description Displays a list of interface information for Ethernet interfaces that this controller
knows about. This includes such interfaces on the controller, subcontrollers, and
access points. The values for one interface are displayed on each output line.
interface set
Sets one or more of the configuration values for the specified interface.
Syntax interface set <node_type> <node_id> <index>
{mtu=<val> | m=<val>}
{physaddress=<val> | p=<val>}
{defaultgateway=<val> | g=<val>}
Argument Description
mtu The MTU of the ethernet interface. From 0 to 65536 bytes. Node must be
rebooted for a new value to take effect.
physaddress The MAC address of the ethernet interface. Node must be rebooted for a
new value to take effect.
defaultgateway Default gateway (in nnn.nnn.nnn.nnn format) for the node on which this
interface exists. Node must be rebooted for a new value to take effect.