Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
30 CLI Command Reference
Revision 0.1, July 2003
if: Interface Commands
Description Displays the following fields for each of the rows requested:
interface ids
Displays the node type, node number, and interface numbers for all Ethernet inter-
faces known to the controller.
Argument Description
node_type See ifstats get.
node_id One or more numbers identifying interfaces that are associated with this con-
troller. Information is displayed for all the listed items.
NOTE:
To list information for all interfaces, use ifstats all.
index
Field Description
Node Type Identifies the type of node this interface belongs to ('WNC', 'ASC' or 'ATS').
Node ID The unique numeric ID of the node.
Index The unique numeric index of the ethernet interface in the interface table.
Description The descriptive name of the ethernet interface.
Type The ARP type of the interface. Typically Typically 'Ethernet' or '802.11'.
Maximum Trans-
fer Unit (bytes)
The MTU of the ethernet interface. From 0 to 65536 bytes. Node must be
rebooted for a new value to take effect.
Interface Speed
(Mbits/sec)
The speed of the ethernet interface, in megabits/second.
Physical
Address
The MAC address of the ethernet interface. Node must be rebooted for a
new value to take effect.
Operational Sta-
tus
The operational status of the interface: 'UP' or 'DOWN'.
Last Change
Time
Time of last operational state change of the interface.
Default Gateway Default gateway (in nnn.nnn.nnn.nnn format) for the node on which this
interface exists. Node must be rebooted for a new value to take effect.