Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 29
Revision 0.1, July 2003
if: Interface Commands
if: Interface Commands
These commands allow a user to set and display the attributes of ethernet interfaces
in the system. Each interface is represented as a row in a table with the attributes as
column or field values. Each row is uniquely identified by the node type, node ID,
and interface index.
{interface | ifc}
Syntax {interface | ifc}
interface all
Displays configuration information for all interfaces recognized by the controller. See
interface get for details.
Syntax interface all
interface get
Displays configuration information for one or more interfaces.
Syntax interface get <node_type> <node_id> <index> [...]