Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
26 CLI Command Reference
Revision 0.1, July 2003
if...stats: Interface Statistics Commands
The interface commands allow a user to display the statistics on the system's
Ethernet interfaces. To display statistics on a single interface, the user must enter
node type ('wnc', 'asc', or 'ats'), the node id, and the interface number on that node.
The definitions of these fields may be found in IETF 1213.
ifstats all
Displays configuration information for all interfaces recognized by the controller. See
ifstats get for details.
Syntax ifstats all
ifstats get
Displays statistics for one or more interfaces.
Syntax ifstats get <node_type> <node_id> <index> [...]
Displays the following fields for each of the nodes requested:
Argument Description
node_id One or more numbers identifying interfaces that are associated with this con-
troller. Information is displayed for all the listed items.
NOTE:
To list information for all interfaces, use ifstats all.
node_type See “Node Identification” on page 2 for more information on these argu-
ments.
index
Field Description
Node Type Identifies the type of node this interface belongs to ('WNC', 'ASC' or 'ATS').
Node ID The unique numeric ID of the node.