Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
24 CLI Command Reference
Revision 0.1, July 2003
if...stats: Interface Statistics Commands
if...stats: Interface Statistics Commands
These commands display the 802.11 interface statistics in the system. To get statistics
on a single 802.11 interface, use the 'get' command and enter the node ID.
if80211stats all
Displays configuration information for all wireless interfaces recognized by the
controller. See if80211stats get for details.
Syntax if80211stats all
if80211stats get
Displays statistics for the wireless interfaces for one or more access points.
Syntax if80211stats get <node_id> [...]
The following information is displayed for each node or interface:
Argument Description
node_id One or more numbers identifying access points that are associated with this
controller. Information is displayed for all the listed items.
NOTE:
To list information for all access points, use if80211stats all.
Field Descrition
Node ID
TX Fragment Count
MCast TX Frame Count