Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
16 CLI Command Reference
Revision 0.1, July 2003
Channel BSSID Commands
channel ids
Displays the channel numbers for all known channels.
Syntax channel ids
Description Displays a list of channel numbers. Numbers are displayed one on each output line.
channel set
Sets one or more of the configuration values for the specified channel.
Syntax channel set <channel_number>
[
bssid=<val> ]
[ active=<val> ]
Argument Description
bssid=<val> The BSS (Basic Service Set) identifier assigned to the channel.
active=<val> Indicates whether the channel is active ('on') or inactive ('off').