Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 15
Revision 0.1, July 2003
Channel BSSID Commands
Channel BSSID Commands
These commands allow a user to manage channel BSSID assignments.
channel all
Displays configuration information for all channels. See channel get for details.
Syntax channel all
channel get
Displays configuration information for one or more channels.
Syntax channel get <channel_number> [...]
Description Displays the following fields for each of the channels requested:
Argument Description
channel_number One or more numbers identifying channels that are associated with this
controller. Information is displayed for all the listed items.
NOTE:
To list information for all channels, use channel all.
Field Description
Channel Number: The unique numeric channel number in the channel table.
BSSID: The BSS (Basic Service Set) identifier assigned to the channel.
Active: Indicates whether the channel is active ('on') or inactive ('off').