Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 13
Revision 0.1, July 2003
auth: RADIUS Authentication Commands
Description Displays the following fields for each of the authentications requested:
auth new
Create a new authentication.
Syntax auth new <auth_id>
[
{radiussecret=<val> | secret=<val>} ]
[ {radiusip=<val> | ip=<val>} ]
auth set
Sets one or more of the configuration values for the specified authentication.
Argument Description
auth_id One or more numbers identifying authentications that are associated with this
controller. Information is displayed for all the listed items.
NOTE:
To list information for all subcontrollers, use auth all.
Field Description
Authentication ID A unique alphanumeric ID of the RADIUS server information.
RADIUS Server Secret The string to hold the RADIUS secret key.
RADIUS Server IP
Address
IP address of the RADIUS server in nnn.nnn.nnn.nnn format.
Argument Description
{radiussecret=<val> |
secret=<val>}
The string to hold the RADIUS secret key.
{radiusip=<val> | ip=<val>} IP address of the RADIUS server in nnn.nnn.nnn.nnn format.