Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
10 CLI Command Reference
Revision 0.1, July 2003
ats: Access Point Commands
Description Displays a list of node numbers of type ATS that are associated with this controller.
Numbers are displayed one on each output line.
ats images
Lists access point upgrade image versions that have been copied to the controller.
ats mappings
Displays access point comm node and nms node ID mappings.
ats scripts
Lists available access point boot scripts.
See wnc set for information on how to assign a default script for all access points.
See ats set for how to assign a script to a specific access point.
ats set
Sets one or more of the configuration values for the specified access point.
Syntax ats set <node_id>
[ desc=text_desc ]
[ location=text_loc ]
[ contact=text_contact ]
[ bootscript=script_name ]