Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 9
Revision 0.1, July 2003
ats: Access Point Commands
ats ids
Displays the node numbers for all known access points.
Syntax ats ids
Uptime The uptime of the access point, in hours, minutes, and seconds
(hh:mm:ss).
Location Text description of the location of this access point.
Contact Person or organization responsible for this access point.
Operational State The operational state of the access point:
ENABLED: The access point is operating correctly.
DISABLED: The access point is known by the controller but it is not
operating correctly.
Availability Status The availability of the access point:
OFFLINE: The controller cannot find the access point.
ONLINE: The controller can find the access point.
Alarm State The severity of the current alarm on the access point. If more than one
alarm is current, the highest severity is displayed. In order of increas-
ing severity, the states are NO ALARM, MINOR, MAJOR, or CRITI-
CAL.
Bound to ASC The subcontroller node ID to which the access point is bound.
Security Mode The security mode that the access point is in; either OPEN or 802.1x.
Privacy Bit The privacy state that the access point is in; one of ON, OFF, or AUTO.
Boot Script The script to run when the access point boots.
Virtual MAC Address The virtual MAC address of the access point.
Boot Image Version The version of the ROM boot image on the access point.
Runtime Image Ver-
sion
The version of the runtime image on the access point.
FPGA Version The version of the FPGA chip on the access point.
Field Description