Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
8 CLI Command Reference
Revision 0.1, July 2003
ats: Access Point Commands
ats: Access Point Commands
These commands manage aspects of access points.
ats all
Displays configuration information for all access point recognized by the controller.
See ats get for details.
Syntax ats all
ats get
Displays configuration information for one or more access points.
Syntax ats get node_id [...]
Description Displays the following configuration information for each of the specified access
points:
Argument Description
node_id One or more node numbers identifying access points that are associated with
this controller. Information is displayed for all the listed access point.
NOTE:
To list information for all access points, use ats all.
Field Description
Node ID The unique numeric ID of the access point.
Serial Number Serial number of the access point.
Description A text description for this access point.