Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 7
Revision 0.1, July 2003
asc: Subcontroller Commands
Example
asc set
Sets one or more of the configuration values for the specified subcontroller.
Syntax asc set node_id
[ desc=<val> ]
[ location=<val> ]
[ contact=<val> ]
[ {wncdns=<val> | dns=<val>} ]
Description You must specify at least one configuration value.
Argument Description
node_id The unique numeric ID of the subcontroller.
desc A text description for this subcontroller
location A text description of the location of this subcontroller.
contact Text name for the person or organization responsible for this subcontrol-
ler.