Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
6 CLI Command Reference
Revision 0.1, July 2003
asc: Subcontroller Commands
asc ids
Displays the node numbers for all known subcontrollers.
Syntax asc ids
Description Displays a list of node numbers of type ASC that are associated with this controller.
Numbers are displayed one on each output line.
Uptime The uptime of the subcontroller, in hours, minutes, and seconds
(hh:mm:ss).
Location A text description of the location of this subcontroller.
Contact Person or organization responsible for this subcontroller.
Operational
State
The operational state of the subcontroller:
ENABLED: The subcontroller is operating correctly.
DISABLED: The subcontrollers is found by the controller but it is not
operating correctly.
Availability Sta-
tus
The availability of the subcontroller:
OFFLINE: The controller cannot find the subcontroller.
ONLINE: The controller can find the subcontroller.
Alarm State The severity of the current alarm on the subcontroller. If more than one
alarm is current, the highest severity is displayed. In order of increasing
severity, the states are
NO ALARM: The subcontroller is not in an alarm state.
MINOR
MAJOR
CRITICAL.
Virtual MAC
Address
The virtual MAC address of the wireless network to which this subcon-
troller belongs. This value is set with the wnc set command.
Software Ver-
sion
The version of the software running on the subcontroller.
Field Description