Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 5
Revision 0.1, July 2003
asc: Subcontroller Commands
asc: Subcontroller Commands
These commands manage aspects of subcontrollers.
asc all
Displays configuration information for all subcontrollers recognized by the
controller. See asc get for details.
Syntax asc all
asc get
Displays configuration information for one or more subcontrollers.
Syntax asc get node_id [...]
Description Displays the following configuration information for each of the specified subcon-
trollers:
Argument Description
node_id One or more node numbers identifying subcontrollers that are associated with
this controller. Information is displayed for all the listed subcontrollers.
NOTE:
To list information for all subcontrollers, use asc all.
Field Description
Node ID The unique numeric ID of the subcontroller.
Serial Number Serial number of the subcontroller.
Description A text description of this subcontroller.