Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
2 CLI Command Reference
Revision 0.1, July 2003
Overview
“SNMP Commands” on page 47
“Station Commands” on page 50
“topo: Network Topology Commands” on page 53
“Watchdog Commands” on page 57
“wirelessif or wif: Wireless Interface Commands” on page 59
“wnc: Controller Commands” on page 63
Overview
The CLI recognizes three classes of user. The ability to use commands in this chapter
depends on the user’s class. Users can be:
User Class Description
guest Can use only those commands that display information.
admin Can use most commands, including all the commands that guest can use.
support Can use all commands.