Installation Instructions
Table Of Contents
- Contents
- About This Document
- Key Concepts
- CLI Command Reference
- Overview
- Alarms Commands
- asc: Subcontroller Commands
- ats: Access Point Commands
- auth: RADIUS Authentication Commands
- Channel BSSID Commands
- connect or remote: Remote Connection Commands
- Console Commands
- db: Configuration Backup Commands
- Help Commands
- History Commands
- if...stats: Interface Statistics Commands
- if: Interface Commands
- qoS or codec: Quality of Service Commands
- qosrule or ruleQoS: Rule Commands
- Quit Commands
- Reboot (or restart) Commands
- security: RADIUS Security Commands
- SNMP Commands
- Station Commands
- topo: Network Topology Commands
- Watchdog Commands
- wirelessif or wif: Wireless Interface Commands
- wnc: Controller Commands
- Glossary
- Index
PRELIMINARY
CLI Command Reference 1
Revision 0.1, July 2003
Chapter 2
CLI Command Reference
This chapter describes the syntax and operation of all CLI commands.
Commands are organized alphabetically within categories. The categories are
“Alarms Commands” on page 3
“asc: Subcontroller Commands” on page 5
“ats: Access Point Commands” on page 8
“auth: RADIUS Authentication Commands” on page 12
“Channel BSSID Commands” on page 15
“connect or remote: Remote Connection Commands” on page 17
“Console Commands” on page 18
“db: Configuration Backup Commands” on page 20
“Help Commands” on page 22
“History Commands” on page 23
“if...stats: Interface Statistics Commands” on page 24
“if: Interface Commands” on page 29
“qoS or codec: Quality of Service Commands” on page 32
“qosrule or ruleQoS: Rule Commands” on page 36
“Quit Commands” on page 42
“Reboot (or restart) Commands” on page 43
“security: RADIUS Security Commands” on page 45