Installation guide

78 Meru Access Point Installation Guide © 2009 Meru Networks, Inc.
Antennas
2.4 - 2.5
802.11 b/g
2.4Ghz = 18
dBi
directional
panel
indoor/
outdoor
360 x
360 x
16
N
female
note:
needs
added
male
P/N: MN-ACC-ANT-BG18P-NF
OAP180 use only. High-gain,
single-band panel antenna
ideal for wireless coverage in
a focused, narrow area or for
providing point-to-point
signal. Requires additional
male type connector or RF
patch cable (MN-ACC-CBL-
5NM-NM) to connect to
OAP180. Cable is sold
seperately; connector not
sold by Meru. Mounting
hardware included.
2.4 - 2.5
802.11b/g
2.4Ghz = 10
dBi
sector
indoor/
outdoor
750 x
88 x70
N
female
note:
needs
added
male
P/N: MN-ACC-ANT-BG10S-NF
OAP180 use only. High-gain,
single-band sector antenna
ideal for wireless coverage in
a wide area (120 degree
coverage). Provides 10 dBi
gain. Requires additional
male type connector or RF
patch cable (MN-ACC-CBL-
5NM-NM) to connect to
OAP180. Cable is sold
seperately; connector not
sold by Meru. Mounting
hardware included.
5.150-
5.350
802.11a
2.4Ghz = 8 dBi
omni-
directional
indoor/
outdoor
22 x
325
N male
P/N: MN-ACC-ANT-A08O-NM-
1
OAP180 use only; mounts
directly to OAP180. Single-
band, operating at lower UNI I
band between 5.15-5.35GHz
providing 8 dBi gain.
Outdoors, coverage is along
the horizontal plane. Vertical
polarization is limited to 24
degrees.
RF Band
(GHz)
Gain (dBi) Coverage
Type
Indoor/
Outdoor
Size
(mm)
Conne
ctor
Description