Installation guide

76 Meru Access Point Installation Guide © 2009 Meru Networks, Inc.
Antennas
2.4 - 2.5
802.11b/g/n
2.4Ghz = 8.5 dBi
directional
panel
indoor/
outdoor
129 x
119 x
38
N
female
P/N: MN-ACC-ANT3-80P
For use with AP200 only. This
directional panel single band
antenna is designed to cover
2.4 GHz frequencies with a
VSWR of less than 1.5:1,
obtaining maximum gain with
an attractive, low-profile
package. This antenna can be
mounted indoors or outdoors
and provides a gain of 8.5 dBi.
Provides UL's highest flame
retardant rating allowing
maximum placement
flexibility. Meets the most
stringent building fire rating
codes. Allows the cable to be
installed in the strictest
indoor mounting locations,
including air ducts. 3 foot
pigtail with RPSMA connectors
and mounting hardware
included.
2.4 - 2.5
802.11b/g/n
2.4Ghz = 13 dB
directional
panel
indoor/
outdoor
224 x
206 x
406
N
female
P/N: MN-ACC-ANT3-130P
AP200 use only. Single band,
low-profile antenna covers
2.4 GHz frequencies with a
VSWR of less than 1.5:1.
Provides UL's highest flame
retardant rating and meets
the most stringent building
fire rating codes. Cable can
be installed in the strictest
indoor mounting locations,
including air ducts. One low
loss 3 foot pigtail with RPSMA
connectors and mounting
hardware included. This
antenna is the same as #830-
00024 (above) but with higher
gain and no mounting bracket
RF Band
(GHz)
Gain (dBi) Coverage
Type
Indoor/
Outdoor
Size
(mm)
Conne
ctor
Description