Installation guide

Checking LED Activity
© 2009 Meru Networks, Inc.Installing the AP150 51
10. For each antenna, loosen the knurled ring at the base of the antenna (see
Figure 29), point the antenna straight down, then retighten the ring.
11. Connect one end of the PoE 100BaseT Ethernet cable to the 100/1000 Ethernet
connector, shown in (see Figure 30).
Checking LED Activity
Access point status LEDs are provided on the Ethernet connector and on the face of
the AP150.
AP150 Status LEDs
Four status LEDs on the face of the AP150 also light, as shown in Figure 34.
Figure 33: AP150 Status LEDs
.
PW
R
LA
N
RADIO 2
RADIO 1
Status LEDs
00166