Installation guide

Installation Requirements

Note:

The AP150 has two security cable slots (one on each side of the AP150) so you

can secure the AP150 with a standard security cable, such as those used to secure

laptop computers.

The following recommended mounting locations provide the best reception for the

AP150:

z On a horizontal surface, such as a table or a desk

z On a vertical surface, usually a wall

z Below a hanging ceiling

To complete this installation, you need the items listed in Tab le .

AP150 Installation Items

You need the tools listed below.

Caution!

The AP150 is not certified for plenum installations, and should not be installed

in the plenum space.

Installation Type Consumable Items Required

Horizontal mounting None

Vertical mounting over a wall stud

z Two #6 x 2" wood screws for a wood stud; or

z Two #6 x 1½" metal screws for a metal stud

z Mounting bracket

Vertical mounting on sheetrock

z Two #6 x 1" sc re w s

z Two #4-6 x 7/8" ribbed plastic wall anchors

z Mounting bracket

Horizontal mounting below a

hanging ceiling

z Two caddy fasteners

z Two plastic spacers

z Two keps nu t s ( w i t h at tached lock washer)

z Mounting bracket