Installation guide

34 Meru Access Point Installation Guide © 2009 Meru Networks, Inc.
Installing the Access Points
Figure 23: Box Hanger Mounting Bracket Holes
4. Attach the U-joint of the clip to the T-bar and snap in place (see Figure 25).
Figure 24: Attaching the Mounting Bracket to the Box Hanger
.
5. Pass the long end clip through the large center hole to the underside of the the
mounting bracket clip and then attach the bracket to the clip using the supplied
screw (see Figure 25 for orientation).
Mounting bracket holes
00101
00104