Installation guide

30 Meru Access Point Installation Guide © 2009 Meru Networks, Inc.
Installing the Access Points
Figure 19: Aligning the AP200 with the Bracket
Figure 20: Sliding the AP200 into the Bracket
8. For external antennas, loosen the knurled ring at the base of each antenna (see
Figure 17), point the antenna straight up, then retighten the ring.
9. Connect one end of the PoE 100BaseT Ethernet cable to the 100/1000 Ethernet
connector, shown in Figure 18.
00115
Mounting bracket attached to wall
AP200
00112
Mounting bracket