Installation guide

Safety Precautions

Chapter 3

Installing the AP200

This chapter describes how to physically install the AP200. It contains the following

sections:

z Safety Precautions

z Unpacking the AP200

z Installation Requirements

z Installing the Access Points

z Where to Go From Here

z Checking LED Activity

Safety Precautions

IMPORTANT—Read and follow the instructions in “Regulatory Information” on page 93

before installing and operating this product.

Unpacking the AP200

As you unpack the AP200, confirm that the AP200 shipping package contains the items

listed on your packing list.

Shipments of the AP200 include a mounting bracket and mounting hardware for stan-

dard wall mounting. Optional mounting kits are available for mounting the AP200

above or below a hanging ceiling. The AP200 mounting studs are placed so they can

be used with brackets supplied by other vendors or to replace an AP100.

Note:

The AP200 has a security cable slot so you can secure the AP200 with a

standard security cable, such as those used to secure laptop computers.