Installation guide

12 Meru Access Point Installation Guide © 2009 Meru Networks, Inc.
Install the AP300
The following antenna connections are used during operation of the AP320, AP311, and AP302.
Table 1: AP300 Radios and Corresponding Antennas
The AP310 has six external antenna ports labeled 1 - 6. However, AP310 uses a maximum of three
antennas and the unused antenna connectors are blocked. Figure 7 illustrates the recommended
antenna configuration for the AP310.
Model Radio 1 (Ant4, Ant5, Ant6) Radio 2 (Ant1, Ant2, Ant3)
AP320
a/b/g/n with 3 dual band
omni-directional antennas
a/b/g/n with 3 dual band
omni-directional antennas
AP311
a/b/g/n with 3 dual band
omni-directional antennas
a/b/g with 3 dual band omni-
directional antennas
AP310
a/b/g/n with 3 dual band
omni-directional antennas
NA
AP302
a/b/g with 3 dual band omni-
directional antennas
a/b/g with 3 dual band omni-
directional antennas
Outdoor
enclosures
Radio 1 Antenna Connectors for AP320
AP311 AP302
Radio 2 Antenna Connectors for AP320
AP311 AP302
Ant4, Ant5, Ant6 Ant1, Ant2, Ant3
Note:
Do not leave any antenna connectors unterminated. All antennas supplied
with the Access Point must be connected to the antenna connectors on the AP.